Remove a Dent From Car bumper

We all love and take full care of our cars. When someone looks and praises our car, we feel extremely happy and obliged. But a small scratch on them and the pain can be actually seen on our face. And what if your new car suffers from a dent on its bumper? The whole beauty and the charisma of the car is lost to that single dent on the bumper. But, don't be tensed if your car suffers from a dent as it can be easily repaired within no time.
Here are a few important and easy ways by which you can fix the dent from your bumper and make it look new again.

1. Firstly, try out your hands on the dent. Push the dent with your hands if the bumper is made from plastic. If it is made of metal, use a plunger and place it at the center of the dent and then push it in. You can also use dry ice to repair the dent. Just place it on top of the dent until the dent is repaired by itself.
2. If it is a bit stronger and you are not able to push the dent back with your hands then use a hairdryer and set it on the hottest value and place it at the point of the dent for some time in a sweeping motion.
3. When the dented region has become comparatively hot, wear gloves and then try push the dent outside to its right place using a wooden block.
4. In case the dent is still visible, use a dent fixing tool or a kit such as the Car Body Repairs Dorset, the bumper repair Dorset, etc. that are easily available in all auto parts stores.
5. You can also consider using the hot air guns to fix the dent. Place this hot air gun about one foot away from the dented area and then slowly bring the gun closer to the dent. Also keep in mind that you should not move the gun closer than or away from the 12cm of the bumper.
6. The dented area should be visibly hot. To check I it is hot enough for repairing the dent, place a spatula on the dent and if it leaves a mark, the dent is hot enough.
7. When the area gets heated properly, take a cloth and place it on the outer side of the dent and then push the dent to its original place using a wooden plank. Keep the wooden plank at that position for a minimum of two minutes.
8. Once this is done, place a fan near the bumper to cool off the bumper. To cool it faster, you can also use compressed air on the dented area.
9. Recheck the dented area and then again repeat the process if required. 10. Clean up the dented region properly and leave the car for further cooling. Thus, now you can fix the dents on your bumper by yourself without taking the help of any mechanic.